Enamel PF-115 c XX veka and now is widely used during the painting work. In this case it is the most mass produced enamel alkyd diverse range of materials produced paint industry. Enamel PF-115 – a suspension in semi-finished lacquer pentaphthalic different pigments and fillers. As a rule, for the production of enamels PF-115 is used semi-finished lacquer PF-060. Rutile Titanium dioxide is used in the manufacture of alkyd enamel as the main white pigment. A wide range of colored pigments, which are used in the manufacture of enamels PF-115, allows to produce different colors of enamel accordance with all known card-indexes of colors. At present, the production of alkyd enamel, including enamel PF-115, fillers are a variety of materials, such as Micro, mikrokaltsit, mikrodolomit etc.
They replaced the previously used natural chalk, significantly adversely affects the appearance, physical characteristics and weather coverage. To accelerate the drying of coatings in the manufacture of enamels PF-115 was added driers, serving as a catalyst of polymerization processes of film-forming substance. Mineral spirits, xylene, toluene and solvent used in the manufacture of enamels PF-115 as solvents. Enamel PF-115 is used to staining of both metallic and wooden products. Enamel is applied in various fields of economy during construction and installation works in painting corrosion studies, and in finishing work, when stained products to give them a presentation. Versatile and excellent quality of consumer – the main advantages of enamel PF-115, which allow its use at industrial facilities and at home. It can operate in temperatures from – 50 to + 50 C. The optimal scheme of enamel PF-115 is the following: a carefully prepared (cleaned and degreased) surface, be sure to dry the surface products must be applied to the primer (the most common – GF-021 primer), and then using the spray gun, roller or brush, apply 2 layers of enamel PF-115.