industry

What To Do When Sewing Equipment Stops Working

Some tailors do not know what to do when the sewing machine stops working. In most cases, we refer to the workshop. For example you have already spent a lot of money on something that poremontirovat machine, and it continues to skip a line, no matter with what fabric and thread you are working. It can not suppress, is not it? Let's try to figure out how to do in this situation. Sewing machine – perfect assistant, but only under the condition that it works correctly. But when there is damage, it turns into a monster that ruins your life. According chtatistike, most sewing machines are repaired in the workshops, can be repaired and home, not while possessing technical expertise. It is important not to panic! The following instructions may be helpful in resolving the problem.

You can check on a piece of cloth, as sewing machine, and then proceed to the main work. If the wrong thread is wound on the spool, it can cause it to rupture. Regardless of where the coil – in cars or on the flywheel – keep the following rules: never wind up the thread of one color to another without too much wind the thread, the thread never mix different sizes of the coil. Most of all damage caused by bad location of the needle. Sure, you may be surprised. If you sew for a long time, we are sure that you know how to properly insert the needle, but in life anything can happen.

So before you start to sew, be sure to check out how needle is located. It will not hurt as before work to check whether you have filled in a thread a sewing machine. Each sewing machine has its own characteristics, so the thread must be threaded properly. Highlight a bit of time trying to come to the conclusion that the sewing machine is working properly

PVC Extruder

Granulation and recycling of plastics recycled and made using extrusion equipment. In Russia, by extrusion processed more than thirty percent of the manufactured thermoplastic, including those such as PVC. The main equipment of the extrusion process of production of PVC edge, as noted above, is an extruder equipped with a shape of the head or die. Prior to submitting to the extruder in a special mixer by intensive mixing of PVC with all the additives for the formulation of the mixture. Equipped with all the required additives and need dried PVC can be fed to the extruder for the final processing.

It should be noted that the uniform dispensing of the material provides a better quality of the extrudate, and, consequently, higher quality of products made of PVC edge. In the extruder the polymer material is melted, plasticized and then injected into the die, ie, the extrusion process consists of sequential movements material in the areas of nutrition, plasticizing, metering of the melt, and then move through the form of a melt and cooling channels. A distinctive feature of today produced plastic PVC edges for facing CPD is the possibility of an accurate selection of colors and simulated wood grain or any other material such as metal (aluminum, stainless steel, bronze, etc.), ceramics, stone, etc. In the world's major producers of PVC edge (for example, REHAU or MKT) range exceeds 40 000 choices of colors, shades and patterns of embossing. PVC edge usually do not require special storage conditions: before using them enough to withstand climatic conditions of the production area. The use of PVC edge in the production of furniture elements gives increased wear resistance, durability and protects the ends of good products from chips, moisture and other damage possible during operation. Pieces of furniture, lined with PVC edge, the most widely used in the manufacture of cabinet household and office furniture (desks, cabinets, shelves, cabinets, etc.). The main furniture elements that use PVC edge are tops (written, computer, cooking, coffee tables, etc.), since they are most often exposed to external mechanical stress during operation.