A complete set of equipment for installation of one air conditioner is worth 3-4 thousand dollars. On the day with a Kit 1 or 2 mounted air conditioner. Directly pay installers. It is usually highly skilled. To produce a quality installation, you need experience at least a year of constant work.
(Typically, inexperienced installer for a long time attached to a professional before you entrust him to work independently.) Warranty on installation work is also included in the cost of installation. Practice shows that over 80% All defects identified in air conditioning systems are the result of mounting "craftsmen" and ephemeral firms. Therefore, no serious company would not be able to offer modern equipment and high level works at bargain prices. 3. The standard installation of a split system: 1. The outdoor unit is installed under the window, so that the upper edge of the outdoor unit was not above the sill (without the involvement of industrial climber). 2. Internal unit mounted on the wall adjacent to the window, at a distance of 70 ..
100 cm from the outer wall. The distance between the ceiling and the indoor unit 20 .. 30 cm height of the ceiling should not exceed 3.5 meters. 3. The length of freon communications do not exceed 5 meters. Indoor communication closed plastic boxes with decorative white section of 60 x 60 or 100 x 60 mm. The holes in the outer wall through which communications are routed, just close the decorative boxes. The box is located on the slope to 5 .. 10 degrees to drain. Communication outside of the building located along the wall, with the attachment of communications to the wall or lying down in a decorative basket of communications not performed. 4. Drainage (corrugated hose) is laid with freon communications and is expelled at 10 .. 20 cm through the nearest exterior wall.