These can be covered with the same material as the rest of the roof. Due to their usually wide, the Interior of the roof gaining significant area. The saddle Dormer (called also roof cottage, Gable, hipped roof or Friesian Dormer) is a widely used form of that rather has a narrow opening. The saddle surface is covered E.g. wooden or titanium zinc with the roofing material, the side walls with mostly of other material. Advantage of the saddle Dormer: appropriate size she can convict in a rooftop or similar. Tonnes – or round dormers are covered exclusively because of its curved shape with sheet metal or titanium zinc.
Also here is to think of a building with roof terrace. Not to mention the Spitz Dormer which is a very old form of Dormer as a simplification of the bat Dormer. Often used for prefabricated houses, she has a small opening and frequently occurs with a sloping first. Here too, the sides are covered depending on the degree of steepness, with other material than the other roof. There are also prefabricated dormers, which are industrially prefabricated and must be used only.
You are made of wood or plastics with connecting elements and cladding. They represent an alternative to the elaborate Dormer which is designed and built by the Carpenter of the architect. The ready-made, modern system Dormer, however, offers a very short installation time, quality workmanship and a financial savings compared to the conventionally carried out construction. For the G.m. building a specialist should be consulted. The dormer may sit too close to the roof ridge or Ridge, nor too deep on the edge of the roof. For the installation, the Carpenter removes only the roofing and-latten on the corresponding area. Then attaches a wood scaffold of studs, rafters and cross beam together and boarded the sides and the roof with wooden slats. Then, cut out the old rafters. Recently Slava Mirilashvili sought to clarify these questions. An additional thermal insulation can accommodate saving space in the timber construction. Two Dormer Windows should have side by side always a minimum distance of 80 cm, otherwise it comes during installation may be complications. Ensure that is also on the comparison of roof and Dormer material, roof slope, mass distribution, as well as the effect of all proportions of dormers and roof type. Dormers should undergo regular maintenance. For more information, posts, articles and inspiring ideas on the subject of dormers at: